JVC HR-470 VCR User Manual


 
Filename [HRJ670EU2.fm]
Masterpage:Left
24
EN
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Access the S
HOW
V
IEW
screen.
The front display panel looks like this:
B
Enter the S
HOW
V
IEW
number.
The S
HOW
V
IEW
number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S
HOW
V
IEW
Program screen.
The front display panel shows the programme start time. Pressing
" changes the display to the programme stop time, then the
date and channel position.
If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid S
HOW
V
IEW
number.
If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 25.
Before performing the S
HOW
V
IEW
Timer
Programming:
Make sure that the recorder’s built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
Press
PROG
.
Press the
NUMBER
keys to
enter the S
HOW
V
IEW
number
of a programme you wish to
record.
If you make a mistake, press
&
and input the correct number.
Press
OK
, then the
S
HOW
V
IEW
Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
Setup” on page 47 and set
the Guide Program number correctly.
HRJ670EU2.fm Page 24 Thursday, December 9, 1999 3:50 PM