JVC HR-470 VCR User Manual


 
Filename [HRJ670EU1.fm]
Masterpage:Left
20
EN
RECORDING
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The recorder’s power comes on automatically and the counter
is reset to 0:00:00.
B
Choose a programme.
Press
PR +/–
or the
NUMBER
keys to select the channel
you wish to record.
C
Set the tape speed.
(HR-J670/671/672/673/674/470/
472EU only)
Press
SP/LP
(
p
). Check the SP/LP indicator on the
recorder’s front display panel to confirm the selected tape
speed.
D
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
E
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
F
Stop recording.
Press
8
on the remote control or
0
on the recorder.
Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
pg. 21) or timer recording (
pg. 24, 26), the
recording will resume automatically when power is restored
to the recorder unless the recorder’s memory backup has
expired.
With HR-J670/671/672/673/674/470/472EU:
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
pg. 23)
With HR-J270/272EU:
B.E.S.T. takes place at the beginning of the first recording
after inserting the cassette. (
pg. 23)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
pg. 37).
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
HRJ670EU1.fm Page 20 Wednesday, April 26, 2000 5:16 PM