JVC HR-470 VCR User Manual


 
Filename [HRJ670EU2.fm]
Masterpage:Right
EN
31
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
recorder as the recorder.
A
Make connections.
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s AV1 (L-1) IN/OUT or AV2 (L-
2) IN/DECODER connector via a cable adapter.
B
Set the recorder’s input mode.
Press
AUX
(
NUMBER
key “
0
”) and/or
PR
to select “L-1”
for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2
(L-2) IN/DECODER connector, depending on the
connectors being used.
C
Set the edit mode.
See “PICTURE CONTROL” on page 37.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
All necessary cables can be obtained from your dealer.
When you select “EDIT” to dub tapes in step
3
, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Your recorder
Audio/Video cable
(not provided)
VIDEO OUT
AUDIO OUT
Camcorder
Cable adapter
(not provided)
Player
HRJ670EU2.fm Page 31 Thursday, December 9, 1999 3:50 PM