Filter
Top Products
24
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
Insert a blank VHS video tape into the VCR deck.
Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
For best results, pause playback at the point from
which you want to record.
Press REC (
z). The DVD goes into PLAY mode
and the VCR goes into RECORD mode. If the
DVD disc menu appears, you may need to press
PLAY (
N) manually to begin copying.
When the DVD is finished playing, press STOP (
x)
to end copying.
Notes:
If you use the DISPLAY or ZOOM function during
copying, the information displayed on-screen will be
recorded.
If the DVD you are attempting to copy is copy pro
-
tected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Discs). “Lock” is displayed in the display window.
You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
When you stop the DVD playback during copying,
the recording on VCR is stopped automatically.
On-Screen Display - VCR
Some of these functions will be displayed every time
the DVD+VCR is operated.
PLAY HI-FI CH 4
SP STEREO
OCT 8 , SAT 2:15 PM
❶ ❷ ❸ ❹ ❺
❻ ❼
1.
2.
3.
4.
5.
•
•
•
•
Each press of the ENTER/OK changes the TV screen
in the following sequence.
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
APR 30 , SAT 2:15 PM
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
DISPLAY to select the real-time counter display. Every
press of DISPLAY changes the TV screen as illus
-
trated below.
2:15 AM 0:05:25
REM 1:07
CLOCK COUNTER REMAINING TIME
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you want
to return to the same point several times.
Begin recording or playing a tape.
Press DISPLAY until the real-time counter is dis
-
played on the TV screen.
At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing CLEAR
(0000).
Continue to play or record.
Press STOP (
x) when recording or playback fin-
ishes.
Press REW
(m). The tape automatically stops
when the tape counter returns to about “0:00:00”.
Tape Remaining
This function displays the amount of time remaining on
the tape during recording or playback. Press DISPLAY
repeatedly until the REM indicator displays on the TV
screen during recording or playback.
The remaining tape length may not be displayed cor
-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
Notes:
The function displays can be seen displayed on the
TV screen for 5 seconds.
The clock (or tape counter, tape remaining) mode
will be displayed until you press ENTER/OK.
The tape counter and the remaining tape length
indicator appear only when a cassette is inserted.
Also, the remaining tape length indicator appears
after any tape operation.
1.
2.
3.
4.
5.
6.
•
•
•
TAPE SPEED DISPLAY
FUNCTION DISPLAY
HI-FI DISPLAY
CHANNEL DISPLAY
A
B
C
D
STEREO/SAP DISPLAY
(MONO is not displayed)
DATE DISPLAY
CLOCK/ COUNT/
REMAIN DISPLAY
E
F
G