Filter
Top Products
EN 25
q
¢
¢
2
2
PLAYBACK AND RECORDING FEATURES
Playback
Features
Still Picture/Frame-By-
Frame Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the CH
5
or
∞
button to correct the picture.
● During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).
● "TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard (੬ pg. 38).
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Press PAUSE repeatedly to advance one frame at a time.
OR
Press TIME SCAN £ repeatedly for forward frame-by-
frame playback or TIME SCAN ™ repeatedly for
reverse frame-by-frame playback.
To resume normal playback, press PLAY.
Slow Motion/
Reverse Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
For hands-free slow-motion, press TIME SCAN ™
during playback to decrease speed in the forward
direction. Continue to press TIME SCAN ™ to select
the two reverse slow motion, reverse play and reverse
search modes.
OR
During still picture, press and hold TIME SCAN £ for
forward slow motion, or press and hold TIME SCAN ™
for reverse slow motion. Release to return to still picture.
To resume normal playback, press PLAY.
Refer to the chart on Pg.37 for the Play, Slow Motion and
Search speeds that are selected using the TIME SCAN
buttons.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback resumes.
CH
3
¶
4¢
78
1
¡
456
7
8
0
9
FF
PAUSE
REW
CH
PLAY
PLAY
TIME SCAN ™/£
TIME SCAN ™/£
PAUSE
FF
REW
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-speed
search, or REW for reverse high-speed search.
● The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.
● TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.
● If the tape speed changes from SP to EP during high-
speed search the TimeScan mode will change to EP
search mode.
● Press TIME SCAN for the opposite direction during
high-speed search of an EP-recorded tape to change
to 7x TimeScan search. (੬ pg. 36)
To resume normal playback, press PLAY.
High-Speed Search