JVC HR-DD740U VCR User Manual


 
EN 39
3
78
1
¡
1
2
3
456
7
8
0
9
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
Press TV/VCR. The VCR's VCR indicator goes out. (If
you are using the RF connection ( pg. 6) to view
the output from your VCR, the TV broadcast being
recorded disappears.)
If you are using the AV connection ( pg. 6), to view
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
Recording
Features
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
Make sure "SUPERIMPOSE" is set to "ON" ( pg. 28).
The indications are not be recorded.
TV/VCR
OSD
C.RESET