Filter
Top Products
28 EN
3
¶
4¢
78
1
¡
1
2
3
456
7
8
0
9
PLAYBACK AND RECORDING FEATURES (cont.)
Superimpose
This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH
5
∞
or TIME SCAN
%
fi
, then press OK.
ACCESS SUPERIMPOSE
SCREEN
3
Move the highlight bar
(arrow) to "SUPERIMPOSE"
by pressing CH
5
∞
or
TIME SCAN
%
fi
, then
press OK.
SELECT MODE
4
Move the highlight bar
(arrow) to "ON" or "OFF" by
pressingCH5
∞
or TIME
SCAN%
fi
.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
NOTE:
If you engage the Record Pause mode, RECORD/PAUSE is
displayed whether "SUPERIMPOSE" is set to "ON" or "OFF".
The superimposed indication on the TV screen tells you what the VCR is doing.
CH 125 RECORD
THU 12:00 AM PAUSE
] SP
INDEX-1
NORM MEMORY OFF
HI–FI COUNT –1:23:45
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
seconds.
Clock time
Tape position indicator
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
BE
+++
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
Tape speed indicator
Counter memory on/off
INDEX indication
Counter reading
Audio mode indicators
FUNCTION
AUTO TIMER
=SUPERIMPOSE
AUDIO SELECT
AUX INPUT
SPECIAL FUNCTION
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
SUPERIMPOSE
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
q
¢
¢
2
2
MENU
OK
CH
OSD
CH
MENU
OK
TIME SCAN
To recall an indication
1 Press OSD.
Ⅲ All indications corresponding to the current status are
displayed for 5 seconds, leaving the counter information,
and RECORD/PAUSE if in the Record Pause mode, on
the screen.
2 Press OSD again to clear the display.