Filter
Top Products
14 EN
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
● If your recorder is connected to the TV via AV connec-
tion, press TV/VIDEO to select the VIDEO mode.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
channel you wish to record. The name of the station
appears in the recorder’s display panel for 5 seconds,
followed by the channel position number. (Only
stations that appear in the Confirmation screen will be
displayed.)
● The TV PROG. dial can also be used to select a channel.
SET TAPE SPEED
3
Press SP/LP. Check the SP/LP indicator on the recorder
display panel to confirm the selected tape speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
RECORDING
Basic
Recording
12
45
3
6
8
0
7
9
1
3
2
6
q
PAUSE
TV PROG.
PAUSE
NUMBER
STOP
SP/LP
TV PROG.
TV/VIDEO
PLAY
RECORD
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (੬ pg. 15).
TV PROG.
STOP/EJECT
PLAY
RECORD
SP/LP
Accidental erasure prevention
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab