JVC HR-J638E/EH VCR User Manual


 
24 EN
TIMER RECORDING(cont.)
Regular Timer
Programming
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
6
Press TV PROG. +/–.
If you’re not receiving
PDC/VPS, press NUMBER
key “7” to set to
"OFF" (
pg. 25).
SET TAPE SPEED
7
Press SP/LP to set the tape speed.
RETURN TO NORMAL
SCREEN
8
After confirming all information is correct, press OK
and the normal screen appears.
Repeat steps 18 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
9
Press TIMER.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday–Friday).
NOTES:
To timer-record from a satellite tuner connected to your
recorder's AV2 IN/DECODER connector, press TV PROG. +/–
in step 6 above to set the channel position to "AUX2".
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "PROGRAM FULL" appears on screen and "FULL"
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
pg. 25).
If you don’t know the SowView number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
Remember, the clock must be set before you can programme
the timer ( pg. 7).
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS TIMER PROGRAM-
MING SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you’re
just starting out, “P1”
appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
SP
– P1 –
START STOP
21: 00 = – : – –
SP
ON
DATE TV PROG
25. 12 – –
[+/–] =
SP
– P1 –
START STOP
– : – – = – : – –
SP
ON
DATE TV PROG
25. 12 – –
[+/–] =
– P1 –
START STOP
21: 00 = 22 : 00
SP
ON
DATE TV PROG
25. 12 1
ARD
[+/ –] =
SP
M
D