Filter
Top Products
basic features 27
When Programmes Overlap Each Other
If PROGRAM OVERLAPPED appears, you have another programme overlapping the
programme you have just made.
confirm overlapping programmes The
Program Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
select programme to modify Press the A
and B buttons, then press
OK (or E). You
can only select one of the overlapping
programmes.
note If you do not mind this overlap, press PROG
to finish the timer programme setting. The
programme with the lower programme number
will be recorded and the other one will not be
recorded correctly. Without doing anything for
about 1 minutes, the VCR will finish the timer
programming.
cancel a programme Press x to cancel a
programme when the Program screen you do not
want is shown.
change a programme Use the START +/–,
STOP +/–, DATE +/–, PR +/–, / and PDC buttons as necessary, then press OK.
PROGRAM COMPLETED appears on the screen for about 5seconds, then normal
screen appears.
note If the overlap is not yet solved or another overlap occurs with the timer
programme setting made last after making correction on a programme, the
conflicting programmes will be shown on the Program Check screen again.
Repeat the above steps again until the overlap is solved.
– P1 –
[x]: DELETE [+/–] a k
[PROG]: EXIT
START STOP
SP VPS/PDC OFF
DATE TV PROG
24.12 3
ITV
8:00
10:00
[1] a k
[PROG]: EXIT
1
2
3
4
5
6
7
8
START
8:00
10:00
11:30
9:00
STOP
10:00
10:45
13:00
10:00
CH
3
2
1
92
DATE
24.12
25.12
25.12
DAILY