Filter
Top Products
EN 15
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
page 14).
OR
During playback, repeatedly press and release
™
or
£
to select the search speed.
● To increase the speed in the forward direction, press
and release £ repeatedly to select the various
forward search modes.
● To decrease the speed in the forward direction, press
and release
™
.
● To play in reverse slow motion, and in reverse play
mode, continue to press
™
repeatedly after
selecting all the forward slow motion modes.
To resume normal playback, press PLAY.
Variable-Speed Search/
Reverse Motion Playback
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. By releasing
SHUTTLE still picture playback is selected.
● For forward high-speed search, turn the SHUTTLE
ring all the way to the right and release it within 1
second.
● For reverse high-speed search, turn the SHUTTLE ring
all the way to the left and release it within 1 second.
OR
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press ™ or £ ( or ).
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
™ or £ ( or ) repeatedly until the correct
number is displayed on screen (only if SUPERIMPOSE is
set to ON (੬ pg. 19). Playback begins automatically
when the desired recording is located.
● If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
fi
%
fi
%
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast- motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
Skip Search
456
7
89
0
4
1
3
FF
PLAY
REW
SKIP SEARCH
FF
REW
PLAY
SHUTTLE