Filter
Top Products
EN 39
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
SET REMOTE CONTROL
MODE
2
Set the VCR/TV/CABLE/DBS switch on the VCR's
remote control to CABLE/DBS.
ENTER CABLE BOX BRAND
3
While holding down POWER on the VCR's remote
control, use the NUMBER keys to enter the cable box
brand number from the chart at bottom left and then
press STOP.
Follow the example shown below.
Check if the cable box's power goes off as it should. If it
does, try other operations (੬ step 4).
● Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
4
Press the corresponding button: POWER, TV PROG +/–
and NUMBER (TV Muting) keys.
● For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
● To change the cable box's channel, press TV PROG
+/– or the NUMBER keys. (The CH +/– button can be
used to change the VCR's channel only.)
● To return the remote to VCR control, set the VCR/TV/
CABLE/DBS switch to VCR.
(Ex.) To set remote control to ARCHER 01:
Press in succession
1
POWER
STOP
0
Release
Hold
down
CABLE BOX BRAND NAME BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17
CITIZEN 15, 16, 17
CURTIS 02
DIAMOND 01, 17
GC BRAND 15, 16, 17
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15
HAMLIN 10, 18, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15
NOVAVISION 02
OAK 07
PANASONIC 13, 14
PULSER 15, 16, 17
RCA 13, 14
REGAL 10, 18
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02
SIGMA 07
SL MARX 05, 16, 17, 24
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 24
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17
VIDEOWAY 03, 09
ZENITH 03, 09
LG 26
TAIHAN (DEHAN) 27
NOTES:
●
Depending on the kind of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
●
It's not possible to set the remote control for both your cable
box and your DBS receiver at the same time; you can only set
the remote control to the brand of either one.
●
You have to subscribe to a cable service to receive cable
channels.
123
456
7
89
0
2
4
1
3
STOP
POWER
ENTER
NUMBER
VCR/TV/CABLE/DBS
TV PROG –
TV PROG +