Filter
Top Products
38 EN
SPECIAL FEATURES
TV Multi-Brand Remote
Control
The VCR's remote control can control several functions on JVC
remote control TVs and on the brands of remote control TVs
listed below.
123
456
7
89
0
2
4
1
3
TURN ON THE TV
1
Turn the power on using the TV's remote control.
SET REMOTE CONTROL
MODE
2
Set the VCR/TV/CABLE/DBS switch on the VCR's
remote control to TV.
SET TV BRAND CODE
3
Refer to the chart below. While holding down POWER
on the VCR's remote control, enter your TV’s brand
code using the NUMBER keys, then press STOP.
Follow the example shown at bottom right.
Check if the TV's power goes off as it should. If it does,
try other operations (੬ step 4).
● Once you have set the remote control to operate the
TV, you don’t have to repeat this step until you
replace your remote control’s batteries.
● GRADIENTE and PHILICO have several different
codes. If the TV does not function with one code, try
entering another.
OPERATE TV
4
Press the corresponding button: POWER, TV PROG +/–,
TV/VCR, TV
+/–, (TV Muting) and NUMBER
keys.
● For some brands of TV, you must press ENTER after
having pressed the NUMBER keys.
● To return the remote to VCR control, set the VCR/TV/
CABLE/DBS switch to VCR.
NOTE:
Depending on the kind of TV, there may be cases where some
or all functions cannot be operated using the remote control.
Release
(Ex.) To set remote control to PHILIPS 03:
TV BRAND NAME BRAND CODE
JVC 01
GRADIENTE 05, 15, 18, 20
PHILIPS 02
CCE 02
SANYO 16
PHILICO 10, 17, 21
SHARP 06
TOSHIBA 14
MITSUBISHI 03
SAMSUNG 12
LG 18
RCA 05
PANASONIC 11
GRUNDIG 19
SONY 07
NEC 20
NOBLEX 22
HITACHI 10
DAEWOO 17
STOP
POWER
Hold
down
Press in succession
TV/VCR
ENTER
NUMBER
VCR/TV/CABLE/DBS
TV
TV PROG –
TV PROG +
TV
3
POWER
STOP
0