Filter
Top Products
EN 21
BASIC PLAYBACK AND RECORDING
Basic
Playback
This VCR can check the tape condition during playback
(and recording), and realizes the best possible pictures.
Load a cassette
Make sure the window side is up, the rear label
side is facing you and the arrow on the front of
the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
● The VCR turns on automatically.
● The counter is automatically reset to “0:00:00”.
● If the cassette’s record safety tab has been
removed, playback begins automatically.
Start playback
Press PLAY ( 3 ).
● Tape speed (SP or EP) is automatically detected.
● The S-VHS indicator lights up when you play
back a tape recorded in S-VHS mode or in S-
VHS ET mode (੬ pg. 27)
● If “VIDEO CALIBRATION” is set to “ON”
(default setting: ੬ pg. 40), “VIDEO
CALIBRATION” appears on the screen, and this
VCR checks the tape condition during
automatic tracking.
● If the tape ends during playback or fast-forward
search, the cassette indication “
” blinks for
a few seconds and the VCR starts rewinding the
tape automatically.
To stop playback
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
To rewind the tape
Press REW ( 1 ).
To fast-forward the tape
Press FF ( ¡ ).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
● You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
Clean the video heads using a dry
cleaning cassette — TCL-2UX —
when:
• Rough, poor picture appears while a tape is played
back.
• The picture is unclear or no picture appears.
• “USE CLEANING CASSETTE” appears on the screen
(only with “SUPERIMPOSE” set to “ON”: ੬ pg. 39,
40.)
123
456
7
89
0
2
4
1
3
STOP ( 7 )
FF ( ¡ )
REW ( 1 )
POWER
PLAY
REW
FF
REC PAUSE STOP/EJECT
+
S-VHS ET
CH
REC LINK
VIDEO (MONO)L—AUDIO—R
STOP/EJECT
( 7 / 0 )
POWER
FF
(¡)
REW
(1)