Filter
Top Products
36 EN
Checking program settings
1 Disengage timer
Press TIMER, then press POWER.
● When “AUTO TIMER” (੬ pg. 40) is set to “ON”,
you do not have to press TIMER.
2 Access Program Check screen
Press PROG. CHECK.
3 Access Program screen
Press PROG. CHECK again to check more detailed
information. Each time you press PROG. CHECK,
the next program’s Program screen appears. When
all Program screens are shown, normal screen
resumes.
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4
5
6
7
8
PRESS (CHECK) TO NEXT
A
Timer warning display
A warning appears on the
TV screen to tell you that
the timer-recording is to
start in 5 minutes if you
are not in the timer
recording standby mode at
that time. Press TIMER to
put the VCR into timer
recording standby mode. To clear the display, press
CANCEL on the Remote.
–WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
TIMER RECORDING (cont.)
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
123
456
7
89
0
2
4
1
3
A
–2, 3
A
–1
A
–1