Filter
Top Products
EN 37
B
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
123
456
7
89
0
2
4
1
3
B
–2
B
–2
B
–3
B
–4
B
–2
Other Useful functions for timer recording
You can also use the following functions for timer
recording.
● Auto Timer (੬ pg. 40)
When “AUTO TIMER” is set to “ON”, the timer recording
standby mode is automatically engaged when the VCR is
turned off. It is temporarily canceled when the VCR is
turned on. You do not have to press TIMER to engage or
disengage the timer recording standby mode.
● Auto SP = EP Timer (੬ pg. 41)
If there is not enough tape to record the entire broadcast
for recording in SP mode, the VCR automatically switches
to EP mode to allow complete recording. This feature is
especially handy when recording a broadcast of more than
2 hours in length.
Canceling or changing program
settings
1 Access Program screen
Repeat steps 1 to 3 on page 36.
2 Cancel or change program setting
To cancel a program, press CANCEL when the
Program screen you do not want is shown.
To change a program, press the appropriate button:
START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/
EP when the Program screen on which you want to
make changes is shown.
3 Return to normal screen
Press PROG. CHECK as many times as necessary
until no Program screen is shown.
4 Reengage timer recording standby mode
Press TIMER.
● When “AUTO TIMER” (੬ pg. 40) is set to “ON”,
the timer recording standby mode automatically
resumes when you turn off the VCR.