JVC HR-S7500EK VCR User Manual


 
32
– –:– –
123
456
7
89
0
2
4
1
3
ADVANCED OPERATIONS (cont.)
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 33.
A
When Using Your Video Recorder As The Source
Player ...
... connect its AV1 IN/OUT connector to the
recording deck.
B
When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN or AV1 IN/OUT connector to
the source player.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select “L-1” for the AV1 IN/
OUT connector, or “L-2” for the AV2 IN connector,
depending on the connector being used.
When using the AV2 IN connector, set "AV2 SELECT"
to the appropriate mode. pg. 33
SET EDIT MODE
3
See "Editing Mode Setting" on page 30.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NUMBER "0"
TV PROG
NOTES:
All necessary cables can be obtained from your dealer.
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
pg. 34).
If you are using another recorder with S-Video and Audio
input/output connectors, you can connect those connectors to
this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT
connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S OUT and AUDIO OUT
connectors to the recording deck's S-Video and Audio input
connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its front panel S-VIDEO and AUDIO input
connectors to the source player's S-Video and Audio output
connectors. Then, set the recorder's input mode to "S-1".