JVC HR-S7500EK VCR User Manual


 
44
SUBSIDIARY SETTINGS (cont.)
%
SELECT STATION NAME
CHARACTER
1
Press until the first letter
of the station name begins
blinking.
ENTER NEW CHARACTER
2
Press %fi to cycle through the characters (A–Z, 0–9, –,
*
, +, (space) ) and stop when the desired character
is indicated, then press to enter. Enter the remaining
characters the same way (maximum of 4).
After entering all characters, press OK.
The Confirmation screen appears.
If you make a mistake, press until the incorrect
character begins blinking. Then enter the correct
character by pressing
%fi
.
CLOSE CONFIRMATION
SCREEN
3
Press MENU.
[
%
%
Set Stations (B)
Perform steps 1 and 2 of "Storing Channels Manually" on
page 42 to access the Confirmation screen before continuing.
SELECT ITEM
1
Press
%fi
until the item you want begins blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice.
SELECT NEW STATION
3
Press until the station
name (ID) begins blinking,
then press
%fi
until the
new station’s name (ID)
you want to store begins
blinking.
Registered station names
( pg. 45) appear as you
press
%fi
.
SWITCH STATIONS
4
Press OK.
The Confirmation screen appears.
Repeat steps 1 through 4 as necessary.
CLOSE CONFIRMATION
SCREEN
5
Press MENU.
Set Stations (A)
Set station names that are registered in your recorder.
%
Perform steps 1 and 2 of "Storing Channels Manually" on
page 42 to access the Confirmation screen and then perform
step 1 and 2 of "Set Stations (A)" on the left before continuing.
Set station names other than the ones registered in your
recorder.
%
%
PR CH ID FINE
06 CH45 –––– +/–
[5∞] : CHANGE ID
[ ] : CURSOR +=
: OK
[MENU] : EXIT
PR CH ID FINE
06 CH45 BBC1 +/–
[5∞] : A-Z, 0-9
[ ] : CURSOR +=
: OK
[MENU] : EXIT