Filter
Top Products
33
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorderTV Receiver TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHAN-
NEL or
AV mode
Another recorderAnother recorder
Recorder
Player
A
B
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN connector of this
recorder.
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or .
3Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
4 Press OK or to select one of the following:
a–VIDEO : If a connected device's output is compatible only with regular video
signals, set "AV2 SELECT" to "VIDEO".
b–S-VIDEO : If a connected device's output is compatible with Y/C signals, set "AV2
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
c–SAT : If a satellite receiver is connected to the AV2 IN connector, set "AV2 SELECT" to
"SAT". (See page 26 as well.)
5 Press MENU to return to normal screen.
● If you are using a satellite receiver, be sure to set "AV2 SELECT" back to "SAT" after editing.
● If you're not using a satellite receiver, leave "AV2 SELECT" set to "VIDEO" or "S-VIDEO".
● The default setting is "VIDEO"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "VIDEO" will be automatically selected when the power is restored to the recorder. If you are
using a satellite receiver, be sure to set "AV2 SELECT" back to "SAT".
fi
fi
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER OFF
S-VHS AUTO
EDIT ON
AV2 SELECT VIDEO
[5∞] =
[MENU] : EXIT