Filter
Top Products
12
Video Plus+
Setup
Turn on the TV and select the VIDEO channel (or AV mode).
INITIAL SETTINGS (cont.)
12
45
3
6
8
0
7
9
2
4
1
3
NUMBER
OK
TV PROG
MENU
4,5
2,6
3,4,5
3,5
IMPORTANT
As Channel 5 has started its service on March 30th 1997,
the Guide Program Numbers of some stations have been
changed as follows:
Station Name
Guide Program Number
Before Now
CHANNEL 5 — 5
RTE1 (IRELAND) 5 6
NETWORK 2 (IRELAND) 6 7
For details, you can consult the JVC Customer Liaison at:
0181-208-7654
CANCEL
PUSH JOG
For Video Plus+ timer recording (੬ pg. 26, 27) to work
correctly, it is necessary for the Guide Program to be set
properly. This should have already been performed during Auto
Set Up or Auto Channel Set, but the following steps will help
you check the settings and make corrections if necessary.
If you do not want to timer record with Video Plus+ (੬ pg. 26,
27), the following procedure is not necessary.
NOTE:
“Guide Program (GUIDE PROG) number" refers to the assigned
TV station numbers, according to broadcast area, for Video
Plus+ timer recording.
IMPORTANT
Perform the following procedure after Auto Set Up on page 10
and/or the channel setting steps on pages 48 – 53, and after the
Clock Set procedure on page 56.
After setting the Guide Program numbers, the station names and
preset positions may be incorrect if you stored or skipped
channels. In this case, re-perform Guide Program number setting.
MAKE LIST OF STORED
STATION NAMES AND
PRESET POSITIONS
1
(Ex.)
ACCESS MAIN MENU
SCREEN
2
Press MENU twice.
ACCESS GUIDE PROG SET
SCREEN
3
Press PUSH JOG %
fi
to move the highlight bar
(pointer) to "GUIDE PROG SET", then press OK.
The Guide Prog. Set screen appears.
5
GUIDE PROG SET
GUIDE PROG TV PROG
11
: AUTO SET BY
VIDEO PLUS+
[ ]: MANUAL SET
[
5
∞] : ?
[MENU] : EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
JLIP ID NO. SET
R.A. EDIT
[5
∞
] =
[MENU] : EXIT
Guide Program Number Set
Preset position Station name
1 BBC1
2 BBC2
3 ITV
4 CH4
5 CH5