Filter
Top Products
50
Manual
Channel Set
TUNER SET (cont.)
Storing Channels Manually
Store channels that were not stored during Auto Set Up (੬ pg.
10) or Auto Channel Set (੬ pg. 48).
ACCESS MAIN MENU
1
Press MENU twice.
ACCESS CONFIRMATION
SCREEN
2
Press PUSH JOG%fi to move the highlight bar (pointer)
to “MANUAL CH SET”, then press OK. The Confirma-
tion screen appears.
SELECT POSITION
3
Press PUSH JOG%
fi
until an open position in
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "21" appears
blinking to the right of
"CH". Press the NUMBER
keys to input the channel
number you want to store.
● For fine tuning adjust-
ment, press PUSH JOG
until the channel
number begins blinking,
then press PUSH JOG
%
fi. While tuning, “F+” or “F–
” appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press MENU.
● To input the station name, see page 52.
● To change positions, see "Change Station Preset
Position" (੬ pg. 51).
%
%
12
45
3
6
8
0
7
9
2
4
1
3
NUMBER
PUSH JOG
OK
MENU
5
5
MANUAL CH SET
PR CH
01 CH21
[
5
∞]/ [0-9] : SELECT
[ ] : CURSOR ↔
: OK
[MENU] : EXIT
%
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (੬ pg. 12) in order to
get proper results from Video Plus+ timer recording.