Filter
Top Products
40
EDITING (cont.)
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
Audio Dubbing
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
A. DUB
PLAY
PAUSE
STOP
CD Player etc.
CD Player etc.
Mixer
output
Original sound
AUDIO OUT
Audio mixer
12
45
3
6
8
0
7
9
2
4
1
3
TV PROG
PAUSE
PLAY
STOP
NUMBER "0"
AUDIO MONITOR
Normal audio track
Video/Hi-Fi audio
track
Pre-recorded tape
Audio-dubbed tape
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO IN L + R
connectors on the recorder's front panel. *When
connecting monaural equipment, use only the
recorder's AUDIO IN L connector.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that
"F-AU" appears in place of a preset position number.
● Refer to "To Select The External Input Mode" on page 33.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
● Your recorder enters the Audio Dubbing Pause mode.
(" " blinks, " " and " " light up on the front
display panel.)
● To perform audio dubbing with audio mixing, press
AUDIO MONITOR to select "L + R" at this point.
*Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if you
don't have an audio mixer.
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
● " " blinks and " " is displayed on the front
display panel.
● To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
NOTES:
●
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO MONITOR to select "L+R+NORM" (
੬
pg. 18).
●
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
●
Audio dubbing is also possible using the rear panel AV1 IN/
OUT or AV2 IN connectors. When using these connectors,
make sure to select the correct input mode in step 2.
●
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
●
When playing back an audio-dubbed tape, press AUDIO
MONITOR to select the soundtrack you wish to hear
(
੬
pg. 18).