A SERVICE OF

logo

22
Operation with tape
VIDEO Plus+ Programming
VIDEO Plus+ greatly simplifies entering the date,
channel, start and end times of a Timer Recording
by simply entering a VIDEO Plus+ Code. VIDEO
Plus+ Codes are published in most TV guide
magazines; they can vary one to nine numbers in
length.
VIDEO Plus+ and PlusCode are registered
trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under
license from Gemstar Development Corporation.
1. Make sure that TV channels have been tuned and
stored in correct VIDEO Plus+ order.
Insert a video cassette with protection tab into your
DVD+VCR.
2. Press VIDEO Plus+.
3. Press the numbered buttons to enter the
PLUSCODE NO. of the TV programme that you wish
to record.
If you make a mistake press 2 then enter the
revised number.
4. Press ENTER/OK.
If PLEASE CHECK is displayed it means that you
have entered the wrong PLUSCODE number,
entered the PLUSCODE number incorrectly.
If “- -” is displayed, you have to enter the programme
number of the station, you want to record from.
5. Press 2 or 1 to select the settings that you wish to
revise. (PR, DATE, TIME and SP).
Press 3 or 4 to enter the correct information.
6. Press 1 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP,
IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN
on the front or from either of the EURO SCART
sockets on the back of VCR, press AUX to select for
correct display (AV1, AV2 or AV3).
7. If you want to make another VIDEO Plus+ recording
repeat stages 2 - 7.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
Press Í/I to switch your DVD+VCR power off mode.
will appear in the video recorder’s display while
your VCR waits to make the recording.
To watch a DVD during timer recording standby
mode, press Í/I and DVD to switch to DVD mode.
8. Press Í/I to end recording.
OK
i
0~9,
PLUSCODE NO.
- - - - - - - - -
REC
OK
i
0~9,
246876543
REC
DELETE :
PLUSCODE NO.
PR DATE TIME
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
10
PR-01 12
SP
11 11 55~::
i
PR DATE TIME
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
10
PR-01 12
SP
11 11 55~::
i
PR DATE TIME
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
10
PR-01 12
SP
11 11 55~::
i
VJ9033CP1Z_E-EK.book Page 22 Friday, March 11, 2005 9:53 AM