Filter
Top Products
29
Operation with DVD and Video CD
OPERATION
Still Picture and Frame-by-Frame Playback
1. Press ; during playback. Advance the picture
frame-by-frame by pressing ; repeatedly.
2. To exit still motion mode, press
1
.
Search
1. Press 6 or 5 during playback.
2. Press 6 or 5 repeatedly to select the required
speed:
DVD disc; X2, X4, X16 or X100
Video CD; X2, X4, X8
3. To exit SEARCH mode, press
1
.
Time Search
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
2. Press 3/4 to select the time clock icon and
“ -:--:-- ” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR ( ) to remove the
numbers you entered. Then input the correct
numbers.
4. Press ENTER/OK to confirm. Playback starts from
the selected time.
Note:
On a Video CD with PBC, you must set PBC to Off on the setup
menu to use this function (See “PBC” on page 18).
Marker Search
To enter a Marker
You can start playback from up to nine memorized points.
To enter a marker, press MARKER at the desired point
on the disc. The Marker icon appears on the TV screen
briefly. Repeat to enter up to nine markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press 2/1 to select a marker
number that you want to recall or clear.
3. Press ENTER/OK and playback starts from the
marked scene. Or, Press CLEAR ( ) and the
marker number is erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
Repeat
You can repeat a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
• Off: does not play repeatedly.
Video CDs - Repeat Track/All/Off
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off: does not play repeatedly.
Note:
• On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 18).
• If you press 9 once during Repeat Chapter (Track)
playback, the repeat playback cancels.
Repeat A-B
To repeat a sequence.
1. Press REPEAT A-B at your chosen starting point.
“A- ” appears briefly on the TV screen.
2. Press REPEAT A-B again at your chosen end point.
“A- B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press REPEAT A-B again to cancel.
Zoom
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence:
100% size → 150% size → 200% size → 300% size
→ 400% size → 100% size.
3. Use the 2 134 buttons to move through the
zoomed picture.
4. To resume normal playback, press ZOOM
repeatedly or CLEAR ( ) button.
Note:
Zoom may not work on some DVDs.
DVD VCD
DVD VCD
DVD VCD
DVD VCD
1/9#5
123------
DVD VCD
DVD VCD
DVD VCD
VJ9033CP1Z_E-EZ.book Page 29 Friday, March 11, 2005 10:12 AM