Filter
Top Products
25
OPERATION
Additional Operation - VCR part
Hi-Fi Stereo Sound System (NIC)
Your DVD+VCR will record and playback Hi-Fi stereo
sound. In addition it has a stereo NICAM digital stereo
sound decoder. This allows you to record and playback
the sound in several different ways. Video cassettes
recorded on your DVD+VCR will have a normal mono
audio track and two VHS Hi-Fi stereo audio tracks.
These stereo tracks allow you to make audio recordings
in Hi-Fi stereo or bilingual mode from a TV broadcast,
stereo audio system, video disc or another Hi-Fi VCR.
1. Your DVD+VCR’s NICAM digital sound decoder
allows you to enjoy broadcasts with NICAM sound,
as well as standard stereo, bilingual and mono
sound. The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
2. Press AUDIO repeatedly until the desired audio
mode appears.
3. The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is
output on the left channel and the secondary
channel is output simultaneously from the right
channel when audio output is set to STEREO. The
primary language will be output from both channels
when the audio setting is MONO.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
Note:
When OFF is selected in NIC, only mono sound will be
output.
On Screen Display (F.OSD)
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the tape.
1. Press DISPLAY to display.
Press DISPLAY repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
2. After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press DISPLAY again to remove all displays from
the TV screen.
Note:
It cannot display when f.OSD is OFF.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the
display window instead of the time by pressing
DISPLAY on the remote control. The Digital Tape
Counter indicates the relative positions of recordings on
the tape.
1. Press DISPLAY.
Press CLEAR ( ) to set the counter to 0:00:00.
Press
1
or start playback or recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
2. Press ∫ when playback or recording is complete.
Press 6.
The tape will rewind and automatically stop when the
counter returns to 0:00:00.
Note:
To rewind to the beginning of the tape, press 6 again.
VJ9033CP1Z_E-EZ.book Page 25 Friday, March 11, 2005 10:12 AM