Filter
Top Products
28
3
Recording a TV program
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
Set the TV/CATV option to the appropriate position (see page
19).
1
2
Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and “SP” or “EP” will
appear on the screen for about 4
seconds.
4
TV - VHF/UHF channels
CATV - CABLE TV channels
Recording and viewing the
same TV program
Press Number keys or VCR CH +/– to select the channel to
be recorded.
VHF/UHF/CATV CHANNELS
TV CATV
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
5
On the VCR, press REC.
Or on the Remote, while holding REC,
press PLAY.
" " will appear on the screen for
about 4 seconds and “REC” will
appear on the display.
NOTES:
If the erase prevention tab is removed,
the tape will eject when both the REC
and PLAY are pressed for recording.
If you wish to watch the DVD playback
during the normal recording on VCR,
press DVD to change to DVD mode
and perform the DVD playback (see
page 36).
•
•
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
00 : 00 : 00 SP
CH 110
CH 110
INDEX
1-9 Press 0 twice and then 1-9 as required. Example: To
select 2, Press “002”.
10-12 Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for “12”.
13-99 Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
2C31501AE(P28-33) 09/12/2002, 15:4028