Filter
Top Products
Filename [XVC33U_07S-VHS.fm]
Masterpage:Left+
30
EN
Page 30 23 July 2003 10:54 am
OPERATIONS ON VCR DECK (cont.)
Skip Search
During playback, press
SKIP SEARCH
1 to 6 times to skip
over unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
Index Search
Your unit automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the unit
is in the Stop mode.
Activate Index Search.
Press
INDEX
(
2
) or
INDEX
(
6
). “INDEX –1” or
“INDEX 1” is displayed on the TV screen and search
begins in the corresponding direction.
● To access index codes 2 through 9, press
INDEX
(
2
) or
INDEX
(
6
) repeatedly until the correct index number is
displayed.
Example:
To locate the beginning of B from the current position, press
INDEX
(
2
) twice.
To locate the beginning of D from the current position, press
INDEX
(
6
) once.
● When the specified index code is located, playback begins
automatically.
Instant ReView
Simply by pressing a single button, the unit power comes on,
rewinds, and begins playback of the last timer-recorded
program. If you have several programs recorded, you can easily
access any of them.
NOTE:
Before starting, make sure that the unit is off and that the Timer
mode is disengaged.
Activate Instant ReView.
Press . The unit power comes on and the unit
searches for the index code indicating the start of the last
timer-recorded program. Once it’s found, playback begins
automatically.
● To watch the first of the 3 programs, press three
times. The unit searches and begins playback automatically.
You can access a program as far as 9 index codes away from
the current tape position.
To resume normal playback during a Skip Search,
press
PLAY
(
4
).
Current position
Index number
XVC33U_07S-VHS.fm Page 30 Wednesday, July 23, 2003 10:54 AM