JVC HR-XVC33UC VCR User Manual


 
Filename [XVC33U_10Subsidiary.fm]
Masterpage:Left+
82
EN
Page 82 23 July 2003 4:43 pm
SUBSIDIARY SETTINGS (cont.)
Child Lock
You can disable the unit’s operation.
A
Set the Child Lock.
Press and hold
POWER
(
1
) on the Remote for more
than 10 seconds while the unit is turned on. The unit
turns off, and “CL“ appears on the front display panel.
To release the child lock, press and hold
POWER
(
1
) on the
Remote until the unit turns on.
NOTES:
When the child lock function is in use, keep the Remote out of
the children’s reach.
Timer recording programs will be performed even if the child
lock function activated.
Scan Mode Set
(DVD deck)
This unit supports the progressive scan system (eg. 480p*)
as well as the conventional interlaced scan system (eg.
480i*).
If your TV equipped with component video connectors
supports the progressive video input, you can enjoy a
high quality picture by setting the progressive scan mode
to active.
Refer also to the instruction manuals supplied with your TV.
If your TV equipped with component video connectors does
not support the progressive video input, do not change the
scan mode to the “PROGRESSIVE”.
* 480p and 480i indicate the number of scanning lines and
scanning format of an image signal.
• 480p indicates 480 scanning lines with progressive format.
• 480i indicates 480 scanning lines with interlaced format.
A
Switch the mode.
During playback or while stopped, press and hold
PROGRESSIVE SCAN
on the unit or
DVD
on the Remote
for more than 3 seconds, to change the scan mode
between Progressive and Interlace mode.
Turn on the TV and select the VCR channel (or AV
mode).
Slide the
TV/VCR/DVD
switch to the right.
Turn on the TV and select the VCR channel (or AV
mode).
Slide the
TV/VCR/DVD
switch to the right.
XVC33U_10Subsidiary.fm Page 82 Wednesday, July 23, 2003 4:43 PM