JVC HR-XVC33UC VCR User Manual


 
Masterpage:Right-No-Heading
EN
35
Filename [XVC33U_07S-VHS.fm]
Page 35 31 July 2003 4:38 pm
Elapsed Recording Time Indication
1
Set the counter display.
Press
DISPLAY
until a counter reading appears on the
front display panel.
2
Reset the counter.
Press
C.RESET
before starting recording or playback.
The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press
DISPLAY
until the time remaining on the tape
appears.
The front display panel shows the tape remaining time with
z” displayed.
By pressing the
DISPLAY
button, you can change display to
show the clock time, counter reading or tape remaining time.
NOTES:
When you press
DISPLAY
, the on-screen display appears on
the TV screen for 5 seconds, then the displays other than the
counter disappears. To clear the counter display, press
DISPLAY
.
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast. To record a SAP program
received, set “2ND AUDIO RECORD” to “ON”. (
pg. 77)
NOTE:
When the channel is changed on the unit;
The “STEREO” indicator appears on the screen for about
5 seconds if the program is a stereo broadcast.
The “SAP” indicator appears on the screen for about 5 seconds
if the program is a SAP broadcast.
Both indicators appear when a stereo program is accompanied
by SAP sound.
XVC33U_07S-VHS.fm Page 35 Thursday, July 31, 2003 4:38 PM