JVC HR-XVC33UC VCR User Manual


 
Masterpage:Right-No-Heading
EN
85
Filename [XVC33U_11Trouble.fm]
Page 85 22 July 2003 3:07 pm
MP3 Playback (DVD deck)
JPEG Playback (DVD deck)
RECORDING (VCR deck)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. A disc cannot be played.
No MP3 files are recorded to the disc. Replace the disc.
MP3 files do not have the correct file
extension in their file names.
Add correct file extension (.mp3, .MP3 or
any uppercase and lowercase combination
such as .Mp3) to their file names.
MP3 files are not recorded in a format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record MP3 files using
a compliant application.)
The different types of files are recorded
to the disc.
The disc which contains the different types
of files may not be played because of its
disc characteristics or recording
conditions.
2. Not MP3 files but JPEG files are
played.
The MP3/JPEG setting is set to JPEG. When both MP3 files and JPEG files are
recorded to a disc, set MP3/JPEG to
MP3 to play MP3 files. (
pg. 79)
3. The MP3 control display appears on
the TV screen, but no operation can be
performed.
No MP3 files or JPEG files are recorded
to the disc, or the disc is an unplayable
disc (such as CD-ROM).
Replace the disc. (
pg. 9)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. A disc cannot be played.
No JPEG files are recorded to the disc. Replace the disc.
JPEG files do not have the correct file
extension in their file names.
Add correct file extension (.jpg, .jpeg,
.JPG, .JPEG or any uppercase and
lowercase combination such as .Jpg) to
their file names.
JPEG files are not recorded in a format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record JPEG files using
a compliant application.)
2. Not JPEG files but MP3 files are played
back.
The MP3/JPEG setting is set to MP3. When both MP3 files and JPEG files are
recorded to a disc, set MP3/JPEG to
JPEG to play JPEG files. (
pg. 79)
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. Recording cannot be started.
There is no cassette loaded, or the
cassette loaded has had its record safety
tab removed.
Insert a cassette, or using adhesive tape,
cover the hole where the tab was
removed.
2. TV broadcasts cannot be recorded.
F-1 has been selected as the input
mode.
Set to the desired channel.
3. Tape-to-tape editing is not possible.
The source (another video recorder,
camcorder) has not been properly
connected.
Confirm that the source is properly
connected.
All necessary power switches have not
been turned on.
Confirm that all units power switches are
turned on.
The input mode is not correct. Set the input mode to F-1.
4. Camcorder recording is not possible.
The camcorder has not been properly
connected.
Confirm that the camcorder is properly
connected.
The input mode is not correct. Set the input mode to F-1.
5.
and
$
on the front display
panel wont stop blinking.
The end of the tape was reached during
recording.
The program may not have been recorded
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
XVC33U_01.book Page 85 Tuesday, July 22, 2003 3:20 PM