Filter
Top Products
SET UP menu
33
ENGLISH
HV-32/28P37SUE / LCT1453-001A-U / English
5 Press the green or red button
repeatedly until the TV channel you
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
If you cannot hear the normal
sound even when the picture of the
TV channel appears normally:
The SYSTEM setting is wrong. Press the
3 button and choose a SYSTEM that has
normal sound.
6 Press the a
aa
a button and register
the TV channel to a Programme
number (PR)
The normal EDIT menu is resumed.
LANGUAGE
The LANGUAGE setting which was
performed in the “Initial settings” (page 4)
can be changed.
1 Choose LANGUAGE, then press
the a
aa
a or 3
33
3 button
A sub-menu of the LANGUAGE function
appears.
2 Press the 5
55
5 and 6
66
6 buttons to
choose a language. Then press the
a
aa
a button
PICTURE TILT
There are cases where the Earth’s magnetic
force may make the picture tilt or make
unnatural colours appear in the corner of the
screen. If this happens, you can correct it.
1 Choose PICTURE TILT, then press
the a
aa
a or 3
33
3 button
The sub-menu of the PICTURE TILT
function appears.
2 Press the 6
66
6 buttons until the
picture becomes level. Then press
the a
aa
a button
DECODER (EXT-2)
When connecting a Decoder with a T-V
LINK compatible VCR connected to the
EXT-2 terminal, use the DECODER (EXT-
2) function to unscramble the scrambled TV
channels.
1 Turn on the Decoder power
2 Display the TV channel capable of
being unscrambled with the
Decoder on the TV
Even if the Decoder is functioning, a
scrambled picture appears at this time.
3 Display the SET UP menu and
choose DECODER (EXT-2)
D0002(E)-EN
> LANGUAGE
OK
D0018-EN
>> PICTURE TILT
OK
D0029-EN
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
PICTURE TILT
DECODER(EXT-2)
EXT SETTING
OK
ON
HV-32P37SUE_Eng.book Page 33 Wednesday, August 27, 2003 5:49 PM