Filter
Top Products
Remote control buttons and functions
13
HV-32/28P37SJE / LCT1452-001A-U / ENGLISH
Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
“PICTURE TILT” on page 35.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
•PR 6 → press 6
• PR 12 → press 1 and 2
Use the p
pp
p p
pp
p buttons:
Press the p
pp
p p
pp
p buttons to
choose the programme number
(PR) you want or an EXT terminal.
Use the AV button:
Press the AV button to choose an
EXT terminal.
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see “S-IN (S-
VIDEO input)” on page 36.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See “COLOUR
SYSTEM” on page 25.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
and EXT-5 terminals do not support
this function.)
• Since this TV is designed to make full
use of the resolution of the original
video source, the motion may appear
unnatural when the video source is
input with 625p progressive-scanning
component signals.
If this occurs, change the output setting
of the connected device to 625i
interlace-scanning component signal
output.
To return to a TV channel:
Press the b button, the
6
buttons or the
number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 30.
Pressing the G button changes the choice as
follows:
• The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
• Also see your VCR instruction manual.
EXT-1
EXT-5
EXT-2
EXT-4
EXT-3
E3
S3
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
or
or
or
EXT-1
EXT-5
EXT-2
EXT-4
EXT-3
E3
S3
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
or
PR 0
or
or
HV-32P37SJE_Eng.book Page 13 Wednesday, September 3, 2003 8:05 PM