Filter
Top Products
36
SET UP menu
HV-32/28P37SJE / LCT1452-001A-U / ENGLISH
6 Turn on the VCR, and then press
the a
aa
a button to transmit the data
to VCR
The T-V LINKmenu disappears once the
data transmission ends.
7 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 through 6
If the DECODER (EXT-2) function has
been set to “ON” but the TV channel
cannot be unscrambled, check the
following:
• Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
• Has the decoder power been turned
on?
• Can the TV channel be unscrambled
with a decoder?
• Do you need to change the VCR
settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
Instruction manual.
EXT SETTING
1 Choose EXT SETTING, then press
the a
aa
a or 3
33
3 button
The EXT SETTING menu appears.
2 Follow the operation description of
a function you want to use and
operate the function
S-IN:
You can enjoy high-quality picture of the
2 S-VIDEO signal (Y/C signal).
ID LIST:
You can have a name corresponding to
the devices connected for each EXT
terminal.
DUBBING:
You can choose a signal source to be
output from an EXT-2 terminal.
S-IN (S-VIDEO input)
You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the
S-VIDEO signal (Y/C signal).
Preparation:
• First read the device’s instruction manual
and “Additional preparation” on page 39
to connect the device to the TV properly.
Second, follow the device’s instruction
manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
• Do not set S-IN (S-VIDEO input) to an
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
D0020-EN
S-IN
ID LIST
OK
EXT-1
EXT-3
DUBBING
EXT-2
EXT-4
EXT-5
TV
> EXT SETTING
HV-32P37SJE_Eng.book Page 36 Wednesday, September 3, 2003 8:05 PM