Filter
Top Products
3
HV-Z34L1/29V1/ LCT1457-001A / English
Setting up your TV
CAUTION
• Turn off all the equipment including the
TV before connecting anything.
1 Connecting the woofer unit
(only for HV-Z29V1)
1 Fitting the woofer unit
Align the projection on the base of the
woofer unit with the hole in the top of the
TV, and insert the connector into the
woofer terminal.
2 Connecting the supplied woofer
connector to the BASS SPEAKER
OUT terminal on the back of the TV
If the woofer unit is not connected, you
will not be able to enjoy the bass sound.
• Connect so that the lever is raised.
• When disconnecting the woofer
connector, do so while pushing the lever.
2 Connecting the aerial and VCR
• Aerial cable is not supplied. Use a
good quality 75-ohm coaxial cable.
• Read the manual that came with the
VCR before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial socket
on this TV.
If connecting a VCR (see Fig. B):
1 Connect the aerial cable to the aerial
input socket on the VCR, and connect
the VCR and TV with another aerial
cable.
2 Connect the VCR’s VIDEO OUT (video
output) jack and the TV’s VIDEO jack
with a video cable.
To connect a VCR to the TV with an
S-VIDEO cable:
Connect the VCR’s S-VIDEO OUT (S-
VIDEO output) connector and TV’s S
connector with an S-VIDEO cable A,
instead of connecting with a video cable.
3 Connect the VCR’s AUDIO OUT (audio L/
R output) jacks and the TV’s AUDIO jacks
(L/MONO and R) with an audio cable.
• If the VCR’s audio output is in mono,
connect the VCR’s AUDIO OUT (audio
output) jack and the TV’s AUDIO L/
MONO jack with an audio cable.
A
Lever
Fig. A
Fig. B
HVZ34L1_Z29V1.book Page 3 Friday, November 7, 2003 9:30 AM