Filter
Top Products
23
HV-Z34L1/29V1/ LCT1457-001A / English
Using the TV’s menu
Colour DigiPure
Makes the colour outline stand out and
increases the sharpness giving a clearer
picture.
ON:
Colour DigiPure works. Normally use with
this function turned on.
OFF:
Colour DigiPure doesn’t work. This gives a
less clear picture than when this function is
turned on.
COLOUR SYSTEM
The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
1 Choose COLOUR SYSTEM. Then
press the a or 3 button
The sub-menu of the COLOUR SYSTEM
function appears.
2 Press the 5 buttons to choose
MAIN or SUB
MAIN:
You can change the colour system of the
main-picture.
SUB:
You can change the colour system of the
sub-picture.
• Choose MAIN when a sub-picture is
not displayed.
3 Press the 6 buttons to choose the
appropriate colour system. Then
press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system
from the input signal.
• The AUTO function may not function
properly if you have poor signal
quality. If the picture is abnormal in
the AUTO function, choose another
colour system manually.
For colour system in your country or
region, refer to the table below:
D0016-EN
>> COLOUR SYSTEM
MAIN
SUB
PAL
AUTO
OK
Area Country or Region System
Asia,
Middle
East
Bahrain, Kuwait, Oman,
Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia,
Singapore, Thailand, India,
etc.
PAL
China, Vietnam, etc. PAL
Hong Kong, etc. PAL
Islamic Republic of Iran,
Lebanon, Saudi Arabia, etc.
SECAM
Philippines, Taiwan,
Myanmar, etc.
NTSC
Europe
Russia, etc. SECAM
Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium,
etc.
PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
Africa
Republic of South Africa, etc. PAL
Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
HVZ34L1_Z29V1.book Page 23 Friday, November 7, 2003 9:30 AM