Filter
Top Products
33
General Items
MTS technology allows several audio signals to be broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may
also include a Second Audio Program (SAP).
Press the MENU button
➐❷
To MTS
➛❿
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
MTS (Multi-Channel Television Sound)
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio
through your stereo.
Press the MENU button
➐❷
To TV SPEAKER
➛❿
To turn the TV's speakers ON or OFF
E
XIT
when finished
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume level is low!
If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to “ON”.
TV Speaker
TV SPEAKER ON OFF
• External Speakers: When using external speakers or amplifiers, shut off the TV Speakers
(see ‘TV Speaker’) above.
NOTE:
FD mini-IB 1/16/01 3:33 PM Page 33