JVC AV 36980 CRT Television User Manual


 
CLOCK — ON/OFF TIMER
MESSAGE
If you do not set the clock but attempt
to use the On/Off Ti m e r, you will get
the following message:
To YES/NO
Choose YES
Proceed to set the clock as in the
previous column.
If you choose NO, you will receive
the following message:
C L O C K / T I M E R S
3
7
NOTE:
You must have the
clock set to
operate the On/Off
Timer.
SET CLOCK
The Clock is the heart of all timer
functions. The clock must be set
before the timer functions to work.
If you ran TV Guide Plus+ Setup, and
are receiving the TV Guide Plus+
signal, you cannot set the clock, TV
Guide Plus+ sets it for you.
To SET CLOCK
To operate
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
Note: If you attempt to “Start Clock”
without setting the time you will
receive this message:
Note: You can only set the Clock
manually if TV Guide Plus+ is not
operating. TV Guide Plus+ sets the
clock for you, automatically, to the
correct local time.
T I M E 1 2 : 3 4 A M
S TART CLOCK
THANK YOU ! !
POWER INTERRUPTED
WOULD YOU SET CLOCK
F I R S T ?
Y E S
NO
T I M E ––:–– ––
S TART CLOCK
INCORRECT TIME
PLEASE TRY AGA I N
YOU CANNOT OPERAT E
ON/OFF TIMER !
Continued from below…
Continued above…