Filter
Top Products
Appendix 1- Screen Shield 37
The Screen Shield provides a layer of protection for
your television screen. It has a subtle tint which
enhances picture contrast. The screen shield comes
installed on your D-Series projection television. You
can remove the screen shield if you prefer.
To Remove the Screen Shield:
• To begin removal of the screen shield, remove the
top molding clip with a small flat head screwdriver
pressed into the opening at the upper corner of
the television. (Illustration 1)
• Remove the bottom molding clip by using a flat
head screwdriver as in the previous step.
• After loosening all four corners, gently press on
the sides of the screen shield to bow the screen
out towards you. (Illustration 2) It will pop out of
position, pull gently towards you to remove it
completely.
Store the screen shield carefully, in a safe place
where it won’t become scratched or soiled. If you
later decide you wish to reinstall the screen shield,
do the following:
• Insert the screen shield into the channel on the
right side of the television.
• Gently press on the sides of the screen shield to
bow it out towards you. (Illustration 2) Be sure to
keep the right side of the shield in the right-side
channel. Carefully slide the left side of the shield
into the channel on the left-side of the television.
• Reinstall the two molding clips. Press the clips
into place gently, do not force.
Illustration 1
Illustration 2
Wear cotton gloves when working with the screen
shield to guard against fingerprints.
Molding Clip