Filter
Top Products
Connections 9
1) Connect a video cable from the
Video Out jack on the back of the
VCR to either the Video Input 1
or Video Input 2 jacks on the rear
panel of the television.
2) Connect the red audio cable
from the right Audio Output jack
on the VCR to the right Audio
Input jack at the rear of the
television.
3) Connect the white audio cable
from the left Audio Output of the
VCR to the left Audio Input jack at
the rear of the television.
S-Video Connection
To use the S-Video connections
for your VCR, plug an S-Video
cable into the output jack at the
rear of the VCR. Plug the S-Video
cable into one of the two S-Video
inputs at the rear of the television.
• Use either the S-Video or RCA-
type video cable connection, not
both, from any one device.
1) Connect the coaxial cable from
the cable television outlet to the
ANT-A input at the rear of the
television.
2) Connect a coaxial cable from
the CABLE LOOP OUT jack at the
rear of the TV to the input jack on
the back panel of the VCR.
3) Connect a coaxial cable out
from the Output jack on the back
panel of the VCR into the ANT-B
jack at the rear of the television.
Use the diagrams below to connect a VCR to your television. For an antenna or cable connection use
Diagram #1. For stereo-sound connection of an Audio/Video device, use Diagram #2.
VCR Connections
1
2