Filter
Top Products
30
123
456
789
0
123
456
789
0
SHUTTLE PLUS
PLAYBACK AND RECORDING FEATURES (cont.)
Index Search
This function seeks out index codes that are placed on the tape
at recording start.
START SEARCH
1
While the tape is stopped, press SHUTTLE PLUS ™
or £.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
SHUTTLE PLUS ™ or £ repeatedly until the
correct number is displayed on screen (only if SUPER-
IMPOSE is set to ON (੬ pg. 29). Playback begins
automatically when the desired recording is located.
● To find the very beginning of the desired program,
press REW or FF and search visually for the start point.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
REW
FF
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
STOP
PLAY
INDEX MARK
INDEX ERASE
Manual Index Mark/Erase
To mark an index code...
...during playback press INDEX MARK on the VCR.
Ⅲ The VCR will mark an index code at that location.
Ⅲ If "SUPERIMPOSE" is set to ON (੬ pg. 29), "MARK" blinks on
the screen while an index code is being marked.
To erase an index code...
...during playback or still press INDEX ERASE on the VCR.
Ⅲ The VCR will fast-forward to the nearest index code and erase
it. Playback continues after the index code is erased.
Ⅲ If "SUPERIMPOSE" is set to ON (੬ pg. 29), "ERASE" blinks on
the screen while an index code is being erased.