Filter
Top Products
54
SPECIAL FEATURES (cont.)
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
CABLE BOX BRAND NAME BRAND CODE
GENERAL INSTRUMENTS 01, 02, 03, 04, 05, 06, 07, 08
HAMLIN 15, 16, 17, 18
JERROLD 01, 02, 03, 04, 05, 06, 07, 08
OAK 19, 20, 21
PANASONIC 24, 25, 26
PIONEER 13, 14
RCA 24, 25, 26
REGAL 15, 16, 17, 18
SCIENTIFIC ATLANTA 09, 10
SIGMA 19, 20, 21
SPRUCER 24, 25, 26
TOCOM 22, 23
ZENITH 11, 12
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
SET REMOTE CONTROL
MODE
2
Set the TV/CABLE/VCR switch on the VCR’s remote
control to CABLE.
ENTER CABLE BOX BRAND
3
While holding down POWER on the VCR’s remote
control, use the DIGIT keys to enter the cable box
brand number from the chart below and then press
STOP.
● Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
4
First, press POWER to see if the cable box’s power goes
off as it should. If it does, try other functions (CH +/–
and the DIGIT keys can be used to operate the cable
box).
● For some brands of cable box, you must press ENTER
after having pressed the DIGIT keys.
● To return the remote to VCR control, set the TV/
CABLE/VCR switch to VCR.
NOTES:
●
You must set the cable box brand for your remote control and
the cable box brand for your Cable Box Controller (
੬
pg. 18)
separately. The list of cable box brands that can be controlled
by your remote control is different from the list of cable box
brands that can be controlled by your cable box controller.
●
It is possible that the remote control will not operate your cable
box even if the cable box’s channels automatically change
during timer recording using the Cable Box Controller.
123
456
789
0
123
456
789
0
POWER
DIGIT
STOP
CH
ENTER
TV/CABLE/VCR