5
Inserting/removing cassette
Inserting cassette into recorder
Open the dust-proof cover and insert a video cassette with
the tape side up into the cassette compartment by gently
pressing the center part.
•With insertion of a video cassette into the cassette com-
partment, the recorder is automatically turned on. (Auto-
matic power on function)
•The tape counter is reset to 0:00:00. (Automatic counter
reset function)
•When a video cassette whose recording protection tab is
broken is inserted, the machine automatically starts play-
back of the cassette. (Automatic playback function)
•When the car is shaking, it is hard to insert a casette
because the machine is apt to hold the cassette firmly to
prevent the cassette form vibration. In such a case, insert
the cassette strongly or pull the cassette out of the re-
corder once and again try to insert it.
•When a video cassette is completely inserted, close the
dust-proof cover.
•Use an optional VHS cassette adapter C-P6U to play back
VHS-C cassette tape.
How to play back VHS-C cassette tape recorded by Video Movie
For protection of important recording
Break the recording protection tab of the cassette.
•If you want to use the cassette whose recording protec-
tion tab was broken for recording, cover the broken part
with adhesive tape double.
Protection tab
Open the dust-proof cover and press the EJECT button in
the STOP mode.
•Don’t insert fingers or foreign substances into the cassette
compartment. When a little child is near the video cas-
sette recorder, pay heed to him/her not to do so.
•If a video cassette is inserted in wrong posture, it is auto-
matically ejected by the function of the protection cir-
cuit. If it happens, wait for a few seconds and try to insert
it correctly once again.
•After removing a cassette from the recorder, close the dust-
proof cover without fail.
0
POWER
REMOTE POWER SP REC
PAUSE RECSP/EP PLAY REWSTOP
1
FF
¡
#&
0
Removing cassette from recorder
POWER
REMOTE POWER SP
REC
PAUSE
REC
SP/EP
PLAY
REW
STOP
1
FF
¡
#&
0