Filter
Top Products
4
Dew sensor circuit
5 When the cabin whose temperature is consider-
ably low is rapidly heated or the humidity in the
cabin is considerably high, insides of the wind-
screen and cabin windows are sometimes fogged.
At the same time, inside of the video cassette re-
corder mounted on the car is dewed.
5 In such the case (dewed condition), the dew sen-
sor circuit functions to stop machine operation with
indication of blinking POWER indicator lamp.
When the machine falls into such the status, wait
for several hours until the POWER indicator lamp
stops blinking and lights continuously.
High temperature sensor circuit
5 When the temperature of the machine becomes
considerably high, the high temperature sensor cir-
cuit functions to stop machine operation with in-
dication of blinking POWER indicator lamp. When
the machine falls into such the status, turn off the
machine and wait for a while until the POWER
indicator lamp stops blinking while leaving it in a
cool place to lower the temperature. When turn-
ing on the machine again, make sure that the
POWER indicator lamp does not blink before start-
ing operation.
Tape protection circuit
5 When the machine remains in the still playback, slow
playback or recording pause mode for 5 minutes or
longer, the tape protection circuit functions to turn off
the machine for protecting the tape.
Features
5 4-heads stereo Hi-Fi video cassette recorder
5 Cassette door with danger preventive dustproof
cover
5 Mountable in either vertical or horizontal posture
thanks to the highly reliable vibration-resistant de-
sign
5 Remote sensor unit extends the range to install the
video cassette recorder.
Caution on recording in running
•
Recording in running occasionally brings an un-
satisfactory result because noise is frequently re-
corded in running and considerable vibration of
the car makes recording disorder.
Protection circuits
(self-diagnosing circuits)
This video cassette recorder incorporates some pro-
tection circuits inside.
If this video cassette recorder is used as it is dewed, it
may damage the tape and video heads.
ACCESSORIES
• Check to see if the following accessories are supplied with the video cassette recorder.
Mounting bracket x 2
Tapping screw (φ 5 x 20 mm) x 4
Screw (M5 x 8 mm) x 4
Velcro tape x 2 sets
AV cord
(5 m/16.7ft. long)
Power cord
(5m/16.7ft. long)
Remote sensor unit
(5m/16.7ft. long)
Remote control data cord
(5m/16.7ft. long)
Remote control unit
(RM-RK20)
AA-size battery x 2
(for operation check)