JVC LM-170 Flat Panel Television User Manual


 
15
ENGLISH
7 SET-UP MENU items
PICTURE SUB ADJ.
Sets the standard level for the picture adjustments by using the CHROMA/PHASE and CONTRAST/BRIGHT buttons
on the front panel.
CONTRAST*
1
Adjusts the standard level for contrast adjustment. –20 - 00 - +20
BRIGHT*
1
Adjusts the standard level for brightness adjustment. –20 - 00 - +20
CHROMA*
1
Adjusts the standard level for chroma adjustment. –20 - 00 - +20
PHASE*
1
Adjusts the standard level for phase adjustment. –20 - 00 - +20
reset
Restores the items in “PICTURE SUB ADJ.” to the factory settings.
COLOR TEMP.
Selects the color temperature and adjusts the drive level of each color (R/G/B).
COLOR TEMP.*
1
Selects the color temperature.
• When selecting “USER1” or “USER2,” adjust the R/G/B
drive level below.
HIGH (9300), LOW (6500),
USER1, USER2
R DRIVE
Adjusts the drive level of red. –40 - 00 - +40
G DRIVE
Adjusts the drive level of green. –40 - 00 - +40
B DRIVE
Adjusts the drive level of blue. –40 - 00 - +40
SIZE/POSI. ADJ. (USER)
Adjusts the position and size of the picture. This item is available only when video signals are input and “SCAN SIZE”
( page 8) is set to “USER.”
H. SIZE*
1
Adjusts the horizontal picture size. –40 - 00 - +40
H. POSI.*
1
Adjusts the horizontal picture position. –40 - 00 - +40
V. SIZE (4:3)*
1
Adjusts the vertical picture size (for 4:3 aspect ratio). –40 - 00 - +40
V. SIZE (16:9)*
1
Adjusts the vertical picture size (for 16:9 aspect ratio). –40 - 00 - +40
V. POSI. (4:3)*
1
Adjusts the vertical picture position (for 4:3 aspect ratio). –40 - 00 - +40
V. POSI. (16:9)*
1
Adjusts the vertical picture position (for 16:9 aspect ratio). –40 - 00 - +40
SIZE/POSI. ADJ. (RGB)
Adjusts the position of the picture. This item is available only when analog RGB signals are input from the computer.
H. POSI.*
2
Adjusts the horizontal picture position. 00 - 99
V. POSI.*
2
Adjusts the vertical picture position. 00 - 99
DOT CLOCK*
2
Eliminates stripes or flickering by adjusting the both settings.
00 - 99
CLOCK PHASE*
2
00 - 99
NOTE:
*
1
Memorized for each input.
*
2
Memorized for each signal.
03_LM170&150-EN4.indd 1503_LM170&150-EN4.indd 15 06.7.21 0:39:19 PM06.7.21 0:39:19 PM