JVC LPT0543-001A VCR User Manual


 
35
Soundtrack Selection (DV Deck)
The DV recording deck is capable of recording two soundtracks (L and R) and will play back the one you select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
NOTES:
When "12BIT MODE" is set to "FULL SOUND":
For bilingual tapes, both the main and sub audio will be audible.
To select just the main audio or just the sub audio of Bilingual tapes, set "12BIT MODE" to "SOUND1".
12BIT Mode Setting (Audio-dubbed Mini DV Tape)
Press MENU to access the Main Menu screen.
Move the highlight bar (pointer) to "DV MODE SET" by pressing
%
, then press OK or
#
.
Move the highlight bar (pointer) to "12BIT MODE" by pressing
%
, then press OK or
#
to select
"SOUND1", "SOUND2" or "FULL SOUND".
Press MENU to return to the normal screen.
12BIT MODE SOUND YOU HEAR
SOUND1 Original recorded sound
SOUND2 Audio-dubbed sound
FULL SOUND
Original recorded sound and
Audio-dubbed sound
DV MODE SET
SOUND MODE 12BIT
12BIT MODE SOUND1
AUDIO REC NICAM
[5∞] =
[MENU] : EXIT
Sound Mode Selection (DV Deck)
Press MENU to access the Main Menu screen.
Move the highlight bar (pointer) to "DV MODE SET" by pressing
%
, then press OK or
#
.
Move the highlight bar (pointer) to "SOUND MODE" by pressing
%
, then press OK or
#
to
select "12BIT" or "16BIT".
Press MENU to return to the normal screen.
NOTE:
Set "SOUND MODE" to "12BIT" at the original recording on a Mini DV tape, if you wish to
perform Audio Dubbing later.
DV MODE SET
SOUND MODE 12BIT
12BIT MODE SOUND1
AUDIO REC NICAM
[5∞] =
[MENU] : EXIT
TRACK
On-Screen Display
USE
L
R For stereo or Bilingual tapes
L
For main audio of Bilingual tapes
R For sub audio of Bilingual tapes
NOTE:
Bilingual programmes are not currently broadcast in the U.K.