Filter
Top Products
59
S
OUT
SORTIE
(DV/VHS)
ANTENNA
ANTENNE
IN
ENTREE
OUT
SORTIE
AUDIO
(DV/VHS)
L
R
AV2 (L-2)
IN/DECODER
ENTREE/DECODEUR
AV1 (L-1)
IN/OUT ENTREE/SORTIE
SAT CONTROL
CONTROLEUR SAT
OUT
SORTIE
DECODERTV VCR
Connecting To
A Satellite
Receiver
Connect the satellite receiver to the video recorder's AV2 (L-2)
IN/DECODER connector, then connect the recorder's AV1 (L-1)
IN/OUT connector to the TV's 21-pin SCART connector.
NOTES:
●
Set "L-2 SELECT" to "A/V". (
੬
pg. 50)
●
To record a programme via the satellite receiver, select L-2
mode by pressing NUMBER keys and/or PR so that
"L-2" appears on the display panel.
●
For details, refer to the instruction manual for the satellite
receiver.
Mains outlet
TV Aerial
cable
Aerial
connector
Satellite Receiver Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input
connector (SCART)
ANT. OUT
ANT. IN
Back of Recorder
IMPORTANT
When you set "L-2 SELECT" to "SAT" (੬ pg. 50), it is possible to view a satellite broadcast with the TV set to its AV mode even if
the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
●
When the recorder is turned off, only a composite signal is output from the recorder to TV.
●
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video
mode.
S OUT
AUDIO IN
connector
S-VIDEO IN
connector
SYSTEM CONNECTIONS