JVC LT-15B60SJ Flat Panel Television User Manual


 
ENGLISH - 11 -
How to connect other devices
IMPORTANT: Switch off the TV before connect-
ing any external device.
Sockets for external connections are at the
back of the TV. For connection of other devices
via Euroconnector refer to the manuals of the
related devices.
Inserting batteries in the remote
control handset
 Remove the battery cover located on the back
of the handset by gently pulling downwards
from the indicated part.
 Insert two AA/R6 dry cell or equivalent type of
batteries inside.
 Replace the battery cover.
NOTE: Remove the batteries from remote con-
trol handset when it is not to be used for a long
period. Otherwise it can be damaged due to
any leakage of battery.
Old batteries must be disposed in a desig-
nated area. If performance of the remote con-
trol reduces, replace the batteries with the cor-
rect type. Do not combine a used, old battery
or a new one or mixed battery types. Remove
dead batteries immediately to prevent acid
from leaking into the battery compartment.
Switching the TV ON/OFF
To switch the TV on
Your TV will switch on in two steps:
1- Connect the power supply cord to the sys-
tem. Then the TV switches itself to stand-
by mode and the power lamp becomes red.
2- To switch on the TV from stand-by mode
either:
Press the 
/ I button on the remote control
or at the bottom of the TV,
or,
Press a digit button on the remote control so
that a programme number is selected,
or,
Press 
 or   buttons on the remote
control or at the bottom of the TV, so that last
switched off programme is selected.
Either way the TV will switch on and the power
lamp will become green.
To switch the TV off
 Press the  / I button on the remote control
or at the bottom of the TV, so the TV will switch
to stand-by mode and the power lamp will
become red.
NOTE: To switch the TV off completely remove
the mains plug from the socket.
01-ENG-1525-17MB18-1861UK_15B60SJ-50069375.p65 30.09.2005, 10:4411