JVC LT-15B60SJ Flat Panel Television User Manual


 
ENGLISH - 18 -
Source Menu
By pressing   or   button, select the fifth
icon. Source menu appears on the screen.
Use   or   button to select a mode and
then press 
 or OK button to switch to that
mode. You can also switch your TV to EXT
modes by pressing directly to AV button.
Other Features
TV Status
Programme Number, Programme Name
and Sound Indicator are displayed on screen
after programme change for 3 seconds.
This information is also displayed by press-
ing the 
 button. Pressing this button again
shows the current time. Pressing this button
once more removes the on-screen display.
To Display the Time
While watching a TV programme with teletext
transmission, press button twice. The
current time information captured from tele-
text will be displayed on the screen.
If the programme being watched does not have
teletext transmission, no time information will
be displayed.
The time information will disappear after
pressing the 
 button again.
Sound Indicator
 button is used to select Mono or Ste-
reo, or Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for ste-
reo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast is detected. Dual I is selected
in default and also can be selected after Dual
II by Remote Control.
'XDO,,
If Dual II is selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or
by pressing the 
 button on your remote
control, Pseudo/Spatial effect can be turned
on or off.
In Mono transmission the left and right chan-
nels will be added at left channel and dummy
stereo effect will be introduced to end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels.
Picture Mode
Picture mode OSD is displayed when BLUE
button is pressed. Picture mode can be
changed to Manual, Bright, Standard and Soft.
01-ENG-1525-17MB18-1861UK_15B60SJ-50069375.p65 30.09.2005, 10:4418