JVC RM-C1400 Projection Television User Manual


 
70
Freeze
With SELECT, you can select the picture (channel) while viewing TWIN screen. When you
press S
ELECT button, the channel number on the top will be highlighted. Each press of SELECT
will shift the channel.
At first, select TV mode to use the Select function.
Select
Pressing the FREEZE button causes the screen to change to the split-screen display with the still
picture displayed on the right. In order to return to the normal display, press the F
REEZE button
once again.
At first, select TV mode to use the Freeze function.
Button Functions
The display screen shows the current status of timers, inputs and XDS ID.
At first, select TV or STB mode to use the display function. See page 61.
Press the DISPLAY button
The screen to the right shows the following
information:
The current channel or AV input (Channel 05)
The current time (12:20 pm)
• Sleep timer status/minutes remaining (The Sleep
Timer is off)
• On/off timer status (Set to turn on everyday at
7:00 PM, off at 10:00 PM)
• Each Press of the D
ISPLAY button changes the
display mode:
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns display off
Notes:
• You may also turn off the display at any step by pressing M
ENU.
• If the clock, sleep timer or on/off timer are not set, the display screen will show:
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.
Display
05 KLVX PBS
JAZZ FESTIVAL
NOW
SLEEP TIMER
ON/OFF TIMER
ON TIME
OFF TIME
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
Display Time Channel Off
You can use this remote control to operate the basic functions of your external devices. See
page 71 on how to program the remote control to operate your other devices.
Note:
• The remote is preset to control JVC-brand devices.
External device control buttons
LCT2172-001C-A English.indd 70LCT2172-001C-A English.indd 70 3/26/07 8:59:31 AM3/26/07 8:59:31 AM