Filter
Top Products
v
DISC RECORDING AUDIO
For changing the settings of audio to be recorded to the disc
when in the AF, AN, AE or AL mode.
Setting
Values
Description
AUTO Records “Stereo”, “Surround” or “Dual
broadcast” audio sounds as they are.
FIXED Records “Stereo” and “Surround” sounds in
“Stereo”. “Dual broadcast” audio sounds are
recorded as they are.
Memo:
v
Surround sounds of a title become stereo sounds when re-
encode dubbing is performed.
m
AUTO MARKING
During direct recording to a recording media (HDD or optical
disc), you can append chapters by adding a mark at a fixed
interval of 10 minutes.
Setting Values
Description
OFF Disables addition of chapters.
ON Enables addition of chapters.
Memo:
v
The interval for each chapter is fixed at 10 minutes. This
cannot be altered.
v
Regardless of whether “AUTO MARKING” is set to “ON” or
“OFF”, you can perform manual marking using the Mark
button on the remote control.
During manual marking, an on-screen message is
displayed regardless of the “ON SCREEN GUIDE” setting
under “DISPLAY”.
AUDIO
.
1-
4'6740
5'672
5'.'%6
':+6
$&/+:5170&
56'4'1&8+0#7&+15'66+0)
&+)+6#.176
56'4'1&190/+:
10
10&;0#/+%4#0)'%10641.
#7&+1
m
DYNAMIC RANGE CONTROL
For setting the dynamic range compression ratio (ratio
between the maximum and minimum volume) during Dolby
Digital playback.
Setting Values
Description
AUTO Perform compression only for Dolby
TrueHD.
OFF Not compressed.
ON Perform maximum compression.
Memo:
v
Setting to “OFF” may produce the same effects as the “ON”
mode for some discs.
v
Performing compression allows even the slightest sound to
be heard clearly.
v
There may be differences in the effect depending on the
disc used.
m
DOWN MIX
For setting whether to output analog audio.
Setting Values
Description
STEREO Use this setting when connecting an
audio amplifier or TV.
DOLBY
SURROUND
Use this setting when connecting an
amplifier that supports Dolby
Surround.
Settings Menu
81
2012/3/8 13:53:0